Description

Midmark Ritter M9D Ultraclave Autoclave Steam Sterilizer

The Midmark Ritter M9D is an automatic steam sterilizer with a manual door. The M9D sets a time for you after you select your cycle and auto-fills with the correct amount of water. The M9D sterilizes heat and moisture stable items that are compatible with steam sterilization. The M9D can be used in various settings, including active surgery centers, medical practice, schools, industrial labs, doctor’s clinics, or tattoo establishments. 

Key Features: 

• Intuitive display and simple prompts for easy operation 

• Patented, automatic-open door drying to promote faster, more efficient drying of instruments 

• Four pre-programmed sterilization cycles: Unwrapped, Pouched, Packs, Handpieces 

• Programmable controls allow you to change exposure time, temperature, dry time and vent, and store your changes if desired 

• Steam-flush pressure pulse air removal system designed to ensure proper steam penetration 

• LCD display alerts operator if door is not closed completely or reservoir water level is low 

• Reservoir fill port and drain tube located in the front of the unit for ease of draining and filling 

Midmark M9/M9D/M11 Self-Contained Steam Sterilizer User Guide 

Midmark Sterilizer Quick Reference Sheet

Midmark M9/M9D/M11 Specifications

Overall length w/plug: 20.4″(51.8cm)
Overall width: 15.4″(38.9cm)
Overall height w/printer: 15.8″(40.1cm)
Minimum Countertop area: 15.3″x17.9″(38.9cmx45.4cm)
Chamber:
9″ diameter(22.9cm)
15″ depth (38.1cm)
3.5 gal. usable volume (13.4 liters)
Trays:
Two large-7.3″ Wide x 12″ Long x 0.8″ Deep (18.6cm x 30.5cm x 2.2cm)
Two Small-5.6″ Wide x 12″ Long x 0.8″ Deep (14.3cm x 30.5cm x 2.2cm)
Unit weight: 73 lbs. (33.1 kg)
Shipping weight: 81 lbs. (36.7 kg)
Water reservoir capacity: 1.1 gal. (4.1 liters)
Electrical requirements:
115 VAC, 50/60 Hz, 15 Amps Single Phase
115 VAC has 1425 watt tubular immersion heater
Product ID: M9022

Midmark Ritter M9D Ultraclave Autoclave Steam Sterilizer

1. Load the sterilizer with the items to be sterilized.
2. Select the appropriate cycle using the simple controls.
3. Press the “Start” button, and the unit will automatically begin the sterilization process.
4. After the sterilization cycle is complete, the operator must manually open the door to allow the instruments to dry.