Description

GE OEC 6600 Mini-C-Arm Specifications:

X-Ray Tube

• Type: Fixed anode, tungsten filament.
• Target Angle: 13.5 degrees.
• Focal Spot: 0.25 x 0.25 millimeters.
• Filtration Inherent: 0.2 mm Al equivalent.
• Total: 1.8 mm Al equivalent.
• Beam Quality Minimum: HVL 2.6 mm Al @ 70 kV.
• Leakage Technique Factors: 75 kV and 100 pA.
• X-ray Tube Rating: 80 kilovolts maximum.

Dimensions

• Base Dimensions

  • Height: 163.2cm (64.25 inches)
  • Width: 69.21cm (27.25 inches)
  • Depth: 69.21cm (27.25 inches)

• C-Arm Extension

  • Maximum Front 15.94cm (62.75 inches)
  • Max. Height Up 17.90cm (705 inches)
  • Mm. Height Down 22.30cm (8.75 inches)

• Transport Position

  • Height 163.2cm (64.25 inches)
  • Mm. Width 80.65cm (31.75 inches)
  • Mm. Depth 76.84cm (30.25 inches)

GE OEC 6600 Mini-C-Arm Refurbished

The refurbished GE OEC 6600 Mini-C-Arm is a cost-effective and compact medical imaging unit primarily used for orthopedic and other extremity procedures. This unit is often offered by various medical equipment companies in refurbished condition, with the assurance that the unit has been inspected, repaired, and tested to perform according to factory specifications.

Key Features

Dual High-Resolution Monitors: This unit is equipped with two 16-inch high-resolution CRT monitors for clear image display.

Dual-Mode Image Intensifier: A 6/4-inch dual-mode image intensifier allows flexibility during procedures.

Small Footprint: At 27 x 27 inches, this unit is easily transportable and suitable for use in confined spaces.

Imaging Features:

Edge Enhancement: Improves image quality for better diagnosis.

Gamma Correction: Optimizes image brightness and contrast.
Motion Artifact Reduction: Helps reduce artifacts caused by motion.

Image Storage: Allows image storage for review and documentation.

Last Image Hold (LIH): Displays the last image captured when fluoroscopy was stopped.

Fluoro Boost: Provides a fluoroscopy boost for improved image quality.

X-Ray Tube: Uses a fixed-anode X-ray tube with a tungsten filament and a 0.25 x 0.25 mm focal spot.